Products   Principal profile   Product Catalog   
Consultants Approved   Client List    

FLUID BED DRYER
  • RANGE 15 TO 500 KG
  • HEATING : ELECTRICAL
                          STEAM OR
                          THERMIC FLUID RADIATOR
  • UNIFORM AND QUICK DRYING
  • DRYING AT LOW TEMPERATURE
  • SS 316 / 304, MS
 

TECHNICAL SPECIFICATIONS:

DETAILS UNIT AFBD-30 AFBD-60 AFBD-200 AFBD-200
BATCH CAPACITY KG 30 60 120 200
CONTAINER VOLUME LITER 100 200 430 670
HEATING
LOAD		 ELECTRICAL KW 18 36 60 100
STEM KG / HR 25 50 100 160
THERMIC FLUID /
AIR HEATER		 KCAL/HR 20,000 30,000 60,000 1,00,000
BLOWER MOTOR HP 5 7.5 15 20
DRYING TEMPERATURE °C

  50 TO 80
OVERALL
DIMENSIONS
IN MM APPROX.		 L 1600 1750 2400 2450
W 1450 1525 2000 2150
H 2500 3200 3675 3700
POWER SUPPLY

  AC, 3 PHASE, 415 V, 50 HZ, 4 WIRE +

 

GENERAL CONSTRUCTION:

CONTAINER of Fluid Bed Dryer are made out of MS / SS304 / SS316 / Aluminium as per requirement. The perforated sheet & fine wire mesh screen will be provided at the bottom for proper air distribution.
HEATING can be supplied with Electrical, Steam, Thermic Fluid or Hot Air Generator.
Electrically heated Dryer will be provided with heating element of suitable rating having MS galvanised / Stainless steel construction. Steam / Thermic Fluid Radiators are made out of MS / SS Tubes with MS / SS / AL Fins as per requirement.
CONTROL PANEL will consisting of Digital Temp. Controller, Starter for Blower, Synchronous Timer for batch time setting, Indicating Lamps, Fuses, Main Isolator switch etc.

 OPERATIONAL FEATURES:

The wet material is introduce in the Fluid Bed Dryer container which is provided with air distributor perforated plate at the bottom.
The Blower Mounted on the top of the unit will create induced draft and fresh air sucked in to the system, pass through filter and heating element (either Electrical Strip Heater, Steam / Thermic Fluid Radiator). This hot air is then passes through powder. The powder moves up and down in the product container which is called FLUIDISATION. Due to fluidization the heat transfer to products and it dried very fast.
The moisture from product will carry away by the air through filter bags. Filter bags prevent the partials escaping from the Dryer.

 

Back  |  Home   |  Enquiry